|
| |
|
|
Optimal layout proposal of technological workplaces at a small mechanical engineering company
Mohorko, Martin ; Dvořák, Milan (referee) ; Štroner, Marek (advisor)
This master´s thesis is focused on technological designing in a small company ENGITEC Motosport s.r.o. In first theoretical part of the thesis is this subject described in detail and analyzed in terms of economic and technical aspect. Next part describes the current state of the company and the production hall as well with keep on its current layout. In the following chapters is chosen piston-shaped component, which is manufactured by the company and three different variants of the piston production. Then one of them is selected, to which all related capacities calculations are made. In the final part of the thesis is proposed the relevant final layout of the hall and there is also the technical-economic evaluation of the most relevant variant included. Key words
|
|
|
A concept of a revolver hammer manufacturing process
Talanda, Jakub ; Dvořák, Jaromír (referee) ; Sliwková, Petra (advisor)
The objective of this thesis is to propose a manufacturing procedure for the selected part, the Alfa revolver hammer. The paper begins with a short design summary of the part, considers available materials and bar stock, examines individual stages of the manufacturing process and makes a simple economic calculation. It concludes with a series of steps recommended for further action towards full-scale production.
|
|
| |
|
|
Manufacturing of the Mobile Phone Holder
Hřebíček, Robert ; Žák, Ladislav (referee) ; Peterková, Eva (advisor)
The master´s thesis is focused on the manufacture of mobile phone holder. The semi-finished productis a 1.5 mm thick steel sheetroll of S235JRG1. The annual seriesis set at 200,000 units per year. For the production of the part, the method of shearing and bending in a combined tool was chosen. Both technologies were dissected in a literary study, and a production process was developed to design a tool. A suitable production line was purchased for the entire production and the suitability of production was economicallye valuated.
|
|
|
On the production technology of a specific part
Kalina, Adam ; Slaný, Martin (referee) ; Píška, Miroslav (advisor)
This document describes the design of new production technology specific part in an engineering company. The specific part is manufactured on a machining center by milling method. To create model was used SolidWorks software and to create CNC program was used SolidCAM program. There is production process created with new and old technologies. There is a comparison of both technologies in conclusion.
|
|
|
Solution technology multiple groove guide pulley to circular saw.
Koryčan, Jiří ; Osička, Karel (referee) ; Kalivoda, Milan (advisor)
The project developed within the bachelor's degree by the pulley multiple groove design of the technology for desktop performance circular saws. The design work is finished the production of components for the piece and batch production, the choice of the intermediate processing and description of manufacturing operations, including tools used for the single and series production, production design work for production and evaluation of the proposed variants of the production. This thesis has been developed on the basis of the theoretical knowledge gained while studying at the Faculty of Mechanical Engineering in Brno and personal experiences.
|
|
|
Production process of a part from the base of a device
Kunst, Ondřej ; Chladil, Josef (referee) ; Kalivoda, Milan (advisor)
The bachelor's thesis focuses on the solution of the production process of a part from the apparatus base. Introduction of the thesis deals with the analysis of the product and a detailed description of the software construction of the 3D model. The next two parts are devoted to the choice of machines, instruments and gauges. This is followed by a chapter with the analysis of technologies used in the production procedures. The penultimate chapter describes the specific NC programs for the production on the CNC machinery. The final chapter is devoted to the indicative calculation of production process.
|
|
|
Machining of shaft for hybrid car drive
Göth, Karel ; Kalivoda, Milan (referee) ; Osička, Karel (advisor)
This bachelor thesis deals with the production of a shaft for driving a hybrid motor. The whole proces is illustrated by a production process, which has the task of executing the worker from the first task to the last. The work is also focused on the issue of hybrid vehicles, especially the nature of the hybrid engine and their types.
|
|
|
Machining of a guide wheel from turbocharger
Hibš, Dominik ; Varhaník, Matúš (referee) ; Kalivoda, Milan (advisor)
The topic of the bachelor’s thesis is to develop a design for the production of a distribution wheel for a turbocharger. The design includes a description of the part, the choice of material, machines, tools, and the development of the production process. The outcome of this thesis is the creation of a NC program in the HEIDENHAIN system.
|
guest ::
